• 2019-11-29

  Principle:   (1) Laser cutting principle: The principle of laser cutting Laser cutting is to use a focused high-power density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates or reaches the ignition point, and at the same time blows out the molten material by means of a high-speed airflow coaxial with the beam, thereby Achieve the...

• 2019-11-29

Cutting process: The main role of the ultrasonic cutting process is to separate the connected components. The high frequency vibration per second can reduce the pressure on the item to be cut. This results in a neat and clean cutting surface. In practical applications, it is divided into two processes, separated welding and cutting. Separation welding: Ultrasonic can cut thermoplastic multilayer t...

• 2019-11-29

    Traditional cutter: 1. Need sharp cutting edges to increase the requirements for blades; 2. Cloth cutting cannot be edge-sealed. Cutting edges easily cause chipping and damage; 3. Sticky objects are difficult to cut, and it is easy to stick the knife, affecting the cutting effect and efficiency; 4. Need to apply pressure to the object when cutting, which will easily deform soft or fr...

• 2019-11-29

Technician classified workpiece materials into three categories in consideration of the USM suitability: the materials belonging to the first group, such as glass, mica, and quartz, are quite brittle and easy for USM process. The materials are removed by the initiation and propagation of tiny cracks of the workpiece in this situation. The second group includes the materials that exhibit some plast...

• 2019-11-06

Working Principle of Ultrasonic Machining The figure shows the Ultrasonic machining operation. The electronic oscillator and amplifier, also known as the generator, converts the available electrical energy of low frequency to high-frequency power of the order of 20 kHz which is supplied to the transducer.     The transducer operates by magnetron striction. The high-frequency power supply...

• 2019-11-04

  Ultrasonic welding equipment can weld the following automotive parts. Car glove box welding machine Material: PP Features: Can replace the use of screws, buttons and other auxiliary welding; good appearance. Applying the latest vibration and friction welding process can avoid part deformation and surface shrinkage that occur in conventional hot plate welding. Car bumper welding machine The ...

• 2019-11-04

  Car trunk spare tire cover sound insulation cotton ultrasonic spot welder can also be called car trunk spare tire partition sound-absorbing carpet ultrasonic welding machine, is to use ultrasonic technology to weld the sound insulation cotton on the spare tire cover, according to the customer's output and beat A suitable machine is recommended. If the amount is small, it can be welded by a ...

• 2019-11-04

In modern vehicles, whether it is exterior decorative parts (such as bumpers, fenders, wheel covers, deflectors, etc.), interior decorative parts (such as instrument panels, door inner panels, sub-dashboards, glove compartment covers, seats) Chairs, rear guards, etc.), or functional and structural parts (fuel tank, radiator water chamber, air filter cover, fan blades, etc.), the shadow of plastic ...