• 2019-07-26

Ultrasonic plastic welding analysis Principle: Ultrasonic mechanical vibration (frequency of 10-70 kHz, amplitude 1-250 μm) is applied to plastic parts to produce local heating under pressure (heat is due to the combined effect of surface and intermolecular friction) and melting Form a weld. As shown, the ultrasonic welding process is divided into four stages. Stage 1: The horn is in contact with ...

• 2019-07-26

Ultrasonic metal welding machine Ultrasonic metal welding is a special method of connecting the same metal or dissimilar metals by using the mechanical vibration energy of ultrasonic frequency. When the metal is ultrasonically welded, neither the current is supplied to the workpiece nor the high temperature heat source is applied to the workpiece, but the mechanical energy is converted into intern...

• 2019-07-26

Ultrasonic large square wire harness welding   Ultrasonic welding of automobile wiring harnesses is to weld a multi-strand or single-strand electric wire into a wire knot by an ultrasonic welding process. The advantages are: good electrical conductivity after welding, very low or nearly zero resistivity; short welding time, no need for any flux, gas, solder. But at the same time, automotive w...

• 2019-07-26

Ultrasonic automotive wire harness welding machine The equipment parameters of the 3000W ultrasonic wire harness welding machine are as follows: HSW2030 basic parameters Working  Frequency：20KHz Power  capacity：3000w Working  air pressure: 0.1-0.6 mpa Working   voltage：220V  /50Hz Welder  size：520*200*320mm Welder weight：30KG Max  welding section：25 mm² &nbs...

• 2019-07-26

Ultrasonic automotive wire harness welding machine accessories four-piece Specializing in the production of ultrasonic welding heads, wire harness welding heads, four sets of welding heads, ultrasonic welding heads, ultrasonic molds, ultrasonic fixtures, ultrasonic horns, ultrasonic welding heads;   1.what is the ultrasonic horns: Ultrasonic horns are a generic term for all ultrasonic transmi...

• 2019-07-26

Replace the ultrasonic metal welding step   In the actual production operation, customers often face the situation of changing the ultrasonic welding head (mold) by themselves, so how can the welding head be installed quickly and without error? Let's learn it with me. （1）First, open the working air pressure source of the ultrasonic equipment to ensure the normal index of the equipment pressur...

• 2019-07-26

Multi-strand harness and 2mm terminal soldering Ultrasonic metal spot welding is applied to: metal wire harness, copper and aluminum wire harness, metal braided wire, metal stranded wire, metal guide wire, wire harness terminal, battery wire, wire harness forming, wire harness and thin rod, copper wire lead wire, multi-strand Copper wire, motor lead, terminal cable, connector harness, stranded cop...

• 2019-07-26

Lithium Ion Battery Tab The Battery tab is a raw material for lithium ion polymer battery products. For example, the mobile phone batteries used in our lives, Bluetooth batteries, laptop batteries, etc. need to use the ear. The battery is divided into positive and negative poles. The battery ear is the metal conductor that leads the positive and negative poles from the battery core. Generally spea...