• 2023-02-27

Matters needing attention when installing ultrasonic molds 1. Check that the contact surface should be smooth and free of scars. If there are scars, lightly polish with metallographic sandpaper above zero. It is required to be able to smooth the defects without destroying the flatness of the contact surface. 2. Use a volatile and non-corrosive cleaning agent to clean the screws, screw holes and co...

• 2023-02-27

What to pay attention to in ultrasonic vibrating screen transducer There are many accessories used to assist the ultrasonic vibrating screen, and the transducer is one of them. What should I pay attention to when using the transducer?     1. In order to avoid over-current of the power supply or damage to the grid and transducer, please do not turn on the power when the grid is not stretc...

• 2023-02-27

Analysis of non-woven fabric welding technology Non-woven ultrasonic welding technology is the most widely used welding method for non-woven welding in recent years, because ultrasonic non-woven welding does not require any additives, fillers or fluxes, and does not consume a lot of energy. It is simple to operate and efficient. The welding speed is high. , So it has been widely used. Non-woven fa...

• 2023-02-27

What are the benefits of using ultrasonic metal spot welding Now, the ultrasonic welding machine is one of the commonly used welding equipment. Compared with other welding equipment, the ultrasonic welding machine is safer, faster, and has many advantages, so it is well received by everyone. The following is the ultrasonic metal spot welding- Suzhou Runsheng will take you to learn more about it. T...

• 2023-02-27

Comparison of traditional cutting knife and ultrasonic cutting knife Traditional cutter: 1. Need sharp cutting edges to increase the requirements for blades; 2. Cloth cutting cannot be edge-sealed. Cutting edges easily cause chipping and damage; 3. Sticky objects are difficult to cut, and it is easy to stick the knife, affecting the cutting effect and efficiency; 4. Need to apply pressure to the o...

• 2023-02-27

Ultrasonic plastic welding machine, which is a welding equipment developed and designed by ultrasonic plastic welding equipment in the field of plastic welding, is referred to as ultrasonic plastic welding machine in the industry. Ultrasonic welding equipment is a high-tech technology for welding cooked plastic products. All kinds of cooked plastic plastic parts can be welded by ultrasonic we...

• 2021-10-18

What are the main application industries for plastic welding machines? This ultrasonic plastic welding machine is composed of ultrasonic system, protection circuit, ultrasonic transducer system, pneumatic system, frame, workbench and other parts. It is widely used in the automobile industry, electronics industry, medical industry, home appliance industry, non-woven clothing, office supplies, packa...

• 2021-10-18

Ultrasonic wave metal spot welder: It is similar to friction welding, but there are differences. Ultrasonic welding takes a short time and the temperature is lower than recrystallization; it is also different from pressure welding because the applied static pressure is higher than the pressure Solder is much smaller It is generally believed that in the initial stage of the ultrasonic welding proce...