This device is suitable for finishing of various materials,  especially fragile rigid materials. Milling with a rotary  milling cutter, suitable for processing planes, grooves,  surfaces of various shapes (such as splines, gears,  threads) and special surfaces of molds. It is suitable for the precision processing of any hard and  brittle materials; especially the drilling, punching, cutting  and engraving of glass, gemstones, porcelain, gemstones,  semiconductors, ceramics and cemented carbide. Applications: Aerospace, shipbuilding, entity manufacturing  companies, colleges and universities, scientific research  institutions, machinery and equipment transformation  industries.

This ultrasonic milling uses a non-contact rotating device.

Rotary ultrasonic machining is a mechanical type of  non-traditional hybrid machining process that can be used  to process a variety of latest and difficult-to-process  materials, including toughness, hard and brittleness,  ceramics, composite materials, etc. In rotary ultrasonic  machining, the basic material removal phenomenon of  ultrasonic machining is combined with traditional diamond  grinding, resulting in a higher material removal rate,  improved hole accuracy and excellent surface finish.

Ultrasonic Machining is a new mechanical machining process, which can enhance the milling and drilling performance by high frequency micro vibrations. 

Ultrasonic Machining is a new mechanical machining process, which can enhance the milling and drilling performance by high frequency micro vibrations. 

Ultrasonic Machining is a new mechanical machining process, which can enhance the milling and drilling performance by high frequency micro vibrations. 

Ultrasonic milling has proven to be an effective technique for improving titanium, aluminum and stainless steel workability. Under the action of ultrasonic milling, it has more advantage than the traditional milling. In contrast to the effect of ultrasonic machining aluminum, steel, stainless steel, titanium four metallic materials.Improved surface quality of the most prominent is the titanium and aluminum, can improve the cutting ability of the most prominent is the stainless steel, the quality of the workpiece side is the most significant improvement in steel. In addition, for steel quenching after nearly HRC60, the traditional tool is difficult of steel cutting and processing cost is high, only when its hardness is higher than the work piece tool HRC25 above to processing. However, on the basis of traditional tools added to ultrasound, can greatly reduce the cutting of cutting resistance and improve cutting surface quality, but also increase the service life of the tool at least doubled.

Ultrasonic vibration cutting is a kind of pulse cutting in micro view.

Ultrasonic milling tool is a new cutting technology that combines ultrasonic technology and traditional cutting technology.

Ultrasonic oscillator is the energy-gathered part to change  and amplify the electric energy output by generator to  mechanical energy, then pass to work piece. Ultrasonic  oscillator can be designed as the structure which can clamp  a certain range on the basis of requirement of  practical application occasion.

The excellent ultrasonic control technology can ensure the stability of long-term machining. Frequency scanning and power setting can be completed automatically by controller to improve productivity. The tool oscillates at a frequency of approximately 20 kHz by a piezoelectric sensor and an electric oscillator. The tool forces the abrasive grit to normally impact the work surface in the gap between the tool and the workpiece to machine the work surface.

Good finish processing machine , Ultrasonic assisted milling parts , shorten processing time Ultrasonic milling has proven to be an effective technique for improving titanium, aluminum and stainless steel workability. Under the action of ultrasonic milling, it has more advantage than the traditional milling. In contrast to the effect of ultrasonic machining aluminum, steel, stainless steel, titanium four metallic materials.Improved surface quality of the most prominent is the titanium and aluminum, can improve the cutting ability of the most prominent is the stainless steel, the quality of the workpiece side is the most significant improvement in steel. In addition, for steel quenching after nearly HRC60, the traditional tool is difficult of steel cutting and processing cost is high, only when its hardness is higher than the work piece tool HRC25 above to processing. However, on the basis of traditional tools added to ultrasound, can greatly reduce the cutting of cutting resistance and improve cutting surface quality, but also increase the service life of the tool at least doubled.