• 2021-10-18

Ultrasonic wave metal spot welder: It is similar to friction welding, but there are differences. Ultrasonic welding takes a short time and the temperature is lower than recrystallization; it is also different from pressure welding because the applied static pressure is higher than the pressure Solder is much smaller It is generally believed that in the initial stage of the ultrasonic welding proce...

• 2021-10-12

Ultrasonic welding technology has the advantages of energy saving, no need to assemble smoke dissipating devices, no welding accessories when welding, low cost, high efficiency, good sealing, and easy to realize automated production.The development of ultrasonic welding technology is getting faster and faster. 1. Application status of ultrasonic welding technology in industrial products  &ems...

• 2021-09-14

The output power of the ultrasonic plastic welding machine is determined by the diameter and thickness of the piezoelectric ceramic parts, the material and the craft height. Once the ultrasonic transducer is shaped, the maximum power is also determined. The measurement of output energy is a complex overproduction. The larger the ultrasonic transducer The greater the output power of the circuit and...

• 2021-08-30

The simple crack of the ultrasonic mold is mainly caused by two major aspects: The design of the ultrasonic mold is unreasonable, and the optimal frequency is not reached when the precision frequency trimming is not possible. Therefore, the ultrasonic energy is not completely released during the application process. But most of them stay in the ultrasonic mold. Overnight, the mold will show weak w...

• 2021-08-30

With the development of science and technology, many items have begun to be recycled. Some products have been improved from metal materials to plastic materials. This has led to the rapid development of plastics in the industry and made plastic welding equipment very good. But now many people still have some wrong ideas about welding machines. Misunderstanding of workpiece material: Ultrasonic pla...

• 2021-08-27

Ultrasonic mold damage is mainly caused by two aspects. The first is because the design of the ultrasonic mold is unreasonable, and the second is because of the choice of materials. The detailed reasons are introduced as follows. First: The design of the ultrasonic mold is unreasonable, the fine workmanship does not reach the optimal frequency, and the ultrasonic energy is not completely released ...

• 2021-08-27

Metal welding machines are mainly used for high-current terminals, aluminum wires, lithium battery aluminum and lugs (aluminum and aluminum, aluminum and nickel, aluminum and nickel plated copper, copper and nickel), motors, enameled wires, and fuel cell positive hybrid welding vehicles ! Welding welding technology does not require welding mechanical equipment materials, realizes a comprehensive p...

• 2021-08-23

The principle of cleaning ultrasonic application is that the high-frequency oscillation signal sent by the ultrasonic generator is converted into high-frequency mechanical oscillation by the transducer and propagated to the medium. The ultrasonic wave in the cleaning solvent radiates forward in the dense and dense phases of the cleaning liquid to make the liquid The flow produces tens of thousands...