Categories
News
Contact Us
- Contact : Hogo Lv
- Tel : +86-571-88635972
- Fax : +86-571-88638953
- Email : admin@altrasonic.com
- Phone : 0086-15158107730
- Address : Room 1101, Building 1#, No. 398 Kowloon Avenue, Yinhu Street, Fuchun Silicon Valley, Fuyang District, Hangzhou City, Zhejiang Province, China.
-
30khz 500W Ultrasonic Customized Cutter with Air Inlet and Outlet
Ultrasonic cutting knife maximum output power of 300W, for cutting difficult to cut the material, you can use 1mm thick wear-resistant carbide blade, and the user can replace the blade, increase the life of the cutting tool less cost. Ultrasonic cutting is the use of ultrasonic energy, will be cutting the material of local heating melting, to achieve the purpose of cutting mate...
-
Small 30khz Ultrasonic Cutting Machine for ABS / Cell Phone Case
This section of the cutting knife with a 1mm thick alloy knife head, sharp head so that the cutting contact surface becomes smaller, reducing the heat of the head, sharp blade with ultrasonic cutting effect is more ideal. 30K ultrasonic cutting knife can be used for hand-held cutting and automatic mechanical clamping. -
500W Ultrasonic Cutting Blades with Digital Generator for Natual
This section of the cutting knife with a 1mm thick alloy knife head, sharp head so that the cutting contact surface becomes smaller, reducing the heat of the head, sharp blade with ultrasonic cutting effect is more ideal. 30K ultrasonic cutting knife can be used for hand-held cutting and automatic mechanical clamping.Hot Tags : Ultrasonic Slicing -
Flexibility Cutting Aramic and ABS used in Ultrasonic Cutter
Compared to other separation processes ultrasonics stand out with high process speeds and immaculate cutting edges which can be sealed in the same process step. -
30kHz Ultrasonic Trimming Machine with Food Switch for Cutting Gl
The speed of the ultrasonic vibration is so fast that you cannot feel it during the cutting process.Hot Tags : Ultrasonic Cutter Machine -
Low Cutting Forces Tungsten Steel Ultrasonic Blade for Cutting HD
Mainly used in many kinds of plastic materials，such as: ABS PE, PVC, Acrylic, Nonwovens, Chloroprene Rubber, Corrugated Paper, Polywood, Glass Fiber Resin, Thick Cardboard, Linen (linoleum), Urethane, Nylon, PP, etc.Hot Tags : Ultrasonic Cut Knife Ultrasonic Slitter -
Cuting Acrylic Tube with Smooth Edges for Ultrasonic Cutting Equi
Automatic amplitude compensation, which automatically works at the optimal frequency point and output point according to the fluidity of the sampleHot Tags : Ultrasonic Slicing Machine
News
About Us
Skype