Stainless steel ultrasonic atomizing nozzle

1. Working principle of stainless steel ultrasonic atomizing nozzle

  The stainless steel ultrasonic atomizing nozzle can achieve high-frequency mechanical sound waves through a specially designed vibrating head that intersects with compressed air and vibrates, so as to continuously generate 1-10 micron thick fog to cover the dust source and maintain the mixing ratio of dust particles . Ultrasonic atomization

The working principle of the nozzle is that the compressed air or electromagnetically driven cut-off plug causes the atomizing medium to vibrate at high speed and be atomized into particles. Because the vibration frequency exceeds the sound wave, it becomes an ultrasonic atomizing nozzle. The flow control function through pulse width adjustment can make the ultrasonic atomizing nozzle quickly

Repeat on/off. In order to further improve the atomization ability, the air flow path of the resonance cavity is embodied in the air flow amplification function of the nozzle itself, which has a powerful impact. Once this powerful shock wave is generated, the water is sheared into relatively small droplets. These small water droplets, and then perform intense sound energy transfer

Instead of working to a droplet of thousands of microns in size, it is carried away by high-speed air in the explosion.

        The design of our sprinkler has obvious benefits, and its inherent design specific points also make it very reliable from a maintenance point of view. As Bian nozzles do not rely on high pressure to achieve the maximum atomized water effect, the problem of high pressure water pump wear is almost completely eliminated.

Clean the nozzle cavity while the nozzle vibrates.

        The nozzle has no moving parts and is constructed of 100% stainless steel. Compared with brass nozzles. This eliminates wear and corrosion and extends the service life. In the records of a high-speed camera, 2 micron water droplets directly span a distance of 2 meters. Any dust particles are surrounded by dense fog droplets

There is no chance of escape at all. Spray dust suppression uses very little water, no chemicals, and will not increase the overall water content of the transported materials by more than one ten thousandth. The principle is mainly based on the collision and aggregation of water and dust particles of the same size. The scale and mass continue to grow, and the aggregation becomes relatively

Large and heavier powders fall. There is no special treatment in the whole process. Since the material of the stainless steel ultrasonic atomizing nozzle needs to be wear-resistant, long-life, and damage-resistant, most of the market will use 303 stainless steel

  2. Material introduction of stainless steel ultrasonic atomizing nozzle

    Stainless acid-resistant steel is referred to as stainless steel. It is composed of two parts: stainless steel and acid-resistant steel. In short, steel that can resist atmospheric corrosion is called stainless steel, and steel that can resist corrosion by chemical media is called acid-resistant steel. Generally speaking, steel with a content of Wcr greater than 12% has stainless steel

Characteristics of steel Stainless steel can be divided into five categories according to the microstructure after heat treatment: ①Ferritic stainless steel ②Martensitic stainless steel ③Austenitic stainless steel ④Austenitic-ferritic stainless steel ⑤Precipitation carbide stainless steel.

  Because stainless steel has excellent corrosion resistance, formability, compatibility, and toughness in a wide temperature range, it has been widely used in heavy industry, light industry, daily necessities industry, and architectural decoration industries. .

   The first choice of stainless steel ultrasonic atomizing nozzle as a dry mist dust suppression nozzle is the sturdy 303 stainless steel material.

   303 stainless steel features: 303 stainless steel is a Bian type free-cutting stainless, wear-resistant acid steel. In order to improve the performance of the steel, no more than 0.60% of molybdenum can be added to the steel to resist ablation. 303 is a free-cutting stainless steel containing sulfur and selenium, which mainly requires free-cutting and smooth surface

High-degree occasions. sus303 stainless steel improves cutting performance and high temperature resistance bonding performance.

  3. Features of stainless steel ultrasonic atomizing nozzle

 1. From the perspective of maintenance: Since the ultrasonic atomizing nozzle does not rely on high pressure to achieve the maximum atomized water effect, the wear problem caused by the need for a high-pressure water pump is almost completely eliminated.

 2. From the perspective of service life: the ultrasonic atomization nozzle vibrates while cleaning the nozzle cavity. The nozzle has no moving parts and is made of 100% stainless steel. Compared with the brass nozzle, it eliminates wear and corrosion and extends the service life.

 3. Judging from the fogging effect: in the record of a high-speed camera, 2 micron water droplets directly span a distance of 2 meters. Any dust particles surrounded by dense fog droplets have no chance to escape. Spray dust suppression uses very little water, no chemicals, and will not increase more than 10,000 points

One is the overall moisture content of the transport material. The principle is mainly based on the collision and agglomeration of water and dust particles of the same size, the size and quality of the particles continue to grow, and the agglomeration becomes larger and heavier powder falling. There is no special treatment in the whole process.