Ultrasonic spot welder is a new type of equipment that uses the friction principle of ultrasonic high-frequency vibration to convert the energy of ultrasonic vibration into friction energy and transfer it to the surface of the metal to be welded. Under the conditions of the heat generated by friction and the pressure exerted on it, the metal structural molecules are fully activated to form a fusion between the molecular layers.
Ultrasonic spot welding machine adopts microcomputer control, electronic tuning frequency, liquid crystal display, continuously adjustable power, simple operation, stable and reliable work, firm welding, good consistency, and the weldment has the characteristics of firm welding surface, high strength, beautiful appearance, and environmental protection. Easy to operate, built-in electronic protection circuit, safe to use, used for welding of similar metals, can realize single-point or multi-point welding of non-ferrous metals; widely used in battery and hardware industries.
Ultrasonic spot welding machine is an advanced technology to realize the connection of plastic parts and metal parts, which has the advantages of fast, clean, and safe. Using Japanese components, high power and reliable performance. A variety of protection circuits provide companies with effective welding methods and reduce production costs. It is small, flexible and easy to operate.
How to use an ultrasonic spot welder? Ground the wire first, turn on the power-turn on the air source-turn on the power, the beacon light is on. Turn on the power switch of the ultrasonic generator, the power indicator is on, the output failure indicator is slightly bright, and the power adjustment knob is placed in the small position. In use, the output fault indicator lights up for some reason, causing overcurrent protection. At this time, it needs to be closed: turn the power adjustment knob counterclockwise, and then open it after the power is reduced. During normal welding, clamp the parts to be welded on the welding jig and step on the foot switch to perform a welding.
Adjust the "Welding Time" knob to increase the welding time clockwise and decrease the welding time counterclockwise. Power, time and pressure are the three important factors of a welding system. Different specifications of workpiece require different power. Time, incentives, complex adjustments to achieve better process specifications. When the inverter is unloaded, the generator cannot be turned on for a long time, otherwise the inverter will be damaged due to heat. After use, remember to turn off the power switch.
English
1101, Building 1#, No. 398 Kowloon Avenue, Yinhu Street, Fuchun Silicon Valley, Fuyang District
