banner

Ultrasonic Welding A Promising Technology to Weld Both Plastics and Metals

  • 2020-10-30

 

Parts of the ultrasonic welding:

Ultrasonic welding machines are created to effectively convert electricity to mechanical vibrations. The machines come with a microprocessor to read the temperatures and regulate the heating accordingly. 

 

 

Some other components that make up the stack of the machine are:

1. Power supply: A high-frequency ultrasonic welding machine requires a high voltage power supply.

2. Transducer: Transducer takes the high voltage current and converts it to high-frequency vibrations.

3. Booster: It works like an amplifier where it takes the high frequencies and then makes them even more powerful.

4. Sonotrode or Horn: A sonotrode or horn as it is commonly known is the medium between the materials to be welded and the machine. It focuses the ultrasonic vibrations to a localized point.

 

The materials to be welded is commonly fixed on anvil or some type of fixtures that hold them together. A pneumatic press is often attached to the machine so that the pressure can be transferred to the materials using the horn.

 

How does ultrasonic welding melt materials?

Ultrasonic is used in welding to provide small but rapid vibrations. When the horn or sonotrode is attached to materials, the ultrasonic vibrations will cause the materials to vibrate about half a millimeter or so in to and fro motion.

 

Such a minute motion is enough to melt the material because the rate of vibration is quite high. These vibrations cause the materials to rub against each other, and the resulting friction between them generates heat.

 

You can reenact a similar environment by rubbing your hands together rapidly. You will feel the heat being generated between your palms.

 

And if you continue rubbing rapidly, it gets quite uncomfortable. Imagine the heat generated within the materials when they rub against each other with speeds that are hard to pick up by the human eye!

 

The friction raises the temperature to such a degree that the contact points between the materials melt, paving the way for molecular bonding. This is how ultrasonic welding welds plastics.

 

However, there is a slight difference when it comes to welding metals. Ultrasonic welding is used to heat the metal to one-third of its melting point temperature.

 

At this point, the molecules between the two metals will travel across each other, creating a strong molecular bond. There is no melting in metals.

 

© Copyright: 2024 Hangzhou Altrasonic Technology Co.,Ltd All Rights Reserved

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.