NewsHome>>News

Structure of ultrasonic spot welding machine

2021-04-29 17:15:20

The structure of ultrasonic spot welding machine mainly includes ultrasonic welding head, ultrasonic vibrator, ultrasonic horn, etc.

Below we give a brief introduction to each part of the ultrasonic spot welding machine:

1. Power switch: the main power switch of the machine.

2. Ammeter: when there is no load, it indicates the degree of resonance of the welding head (the lower the pointer is, the better, it depends on the number of welding head and the output section, usually between 0.5A-1A); when it is loaded, it indicates the output power (depending on the work Depending on the object).

3. Alarm indicator light: Detect whether the ultrasonic is overloaded, and the light will be on when overloaded.

4. Sound wave test button: used to test the resonance degree of sound wave.

5. Welding head: Transmit the energy emitted by ultrasonic to achieve the purpose of cutting work.

6. Vibrator sleeve (rubber sleeve): used to install the ultrasonic vibrator, which is convenient for grasping the vibrator for work.

7. Control electric box: generate ultrasonic energy.

Precautions for the installation of the vibration box:

(1) Connect the power cord of the vibrating box to the 220V1P power supply, and the power socket must have a ground pin.

(2) The output wire of the machine is inserted into the output socket of the vibrating box and locked.

(3) The machine control cable is inserted into the control socket of the vibration box and locked tightly.

(4) Things that need special attention:

a. Please make sure to connect the grounding wire to the “ground” and not to the “grounding wire” of the power supply to prevent leakage and eliminate the accumulation of static electricity. b. Before installation, make sure that the power supply is disconnected and the power switch on the machine is in the OFF state.

c. The vibration box is about 12kg. Please be careful when repairing and transporting. The inside of the vibrator cover is marked.

8. Ultrasonic vibrator: convert electrical energy into mechanical energy.

9. Ultrasonic horn: connect the ultrasonic welding head and vibrator to transmit ultrasonic energy.

10. There is a frequency adjustment switch on the left side of the machine.

PreviousDesign of welding spot and welding surface when ultrasonic plastic welding machine is working

NextUltrasonic extraction technology can extract edible oil from plants